delivery time 3-7 days

steel stand, 100 cm high, with 20×20 cm base plate, strutted, tube Ø 60 mm

Catalog no.: AS32116 GTIN: 4050822321162
1 pcs.44,22 €

incl. VAT

zzgl. Versandkosten

Hot-Dip Galvanised Steel Satellite Floor Mount – 1 m Mast Ø 60 × 2 mm, Four-Brace Design
The AS32116 is a mechanically anchored steel antenna floor mount designed for suitable satellite installations on structurally suitable terraces, balconies, foundations and other solid mounting surfaces.
According to the available product data, the integrated mast is 1000 mm high and measures Ø 60 mm with a 2.0 mm wall thickness.
Four support braces connect the mast to the 200 × 200 × 3 mm base plate.
The mounting hole centre spacing is specified as 147 × 92 mm, and the holes are designed for M8 screws according to the product information.
The steel structure is hot-dip galvanised according to EN ISO 1461.
According to the available product data, the AS32116 is suitable for satellite dishes up to Ø 120 cm and weighs approximately 4.8 kg.
1 m mast with Ø 60 mm diameter
Mast specifications:
– Height: 1000 mm
– Outside diameter: Ø 60 mm
– Wall thickness: 2.0 mm
The antenna clamp must be compatible with a Ø 60 mm mast.
This should be checked carefully because many smaller satellite dishes use clamps for smaller mast diameters.
Four support braces
The mast is supported by four braces according to the product data.
These reinforce the transition between the mast and base plate and help transfer bending loads into the mounting structure.
Base plate 200 × 200 × 3 mm
Base plate dimensions:
– 200 × 200 mm
– 3 mm thick
Mounting hole spacing 147 × 92 mm
According to the available product information, the centre spacing of the fixing holes is:
– 147 × 92 mm
The actual hole pattern should still be checked on the supplied product before drilling.
Designed for M8 screws
The mounting holes are intended for M8 screws according to the product data.
The correct anchor system depends on the actual structural substrate and expected load.
Secure anchoring required
The term “floor stand” should not be interpreted as an unsecured free-standing installation.
The AS32116 must be mechanically anchored to a suitable structural surface.
Its approximate 4.8 kg own weight does not replace the required fixing.
Suitable for satellite dishes up to Ø 120 cm
According to the available product data, the stand is suitable for satellite dishes up to 120 cm in diameter.
This does not constitute a universal structural approval for every location.
Actual suitability depends on:
– antenna weight
– wind area
– installation height
– mounting substrate
– anchor system
– local wind exposure
Large antennas create high wind loads
A satellite dish approaching 120 cm in diameter can generate substantial wind forces.
These loads act through the mast and bracing onto the base plate and anchors.
Hot-dip galvanised steel
The structure is manufactured from steel with hot-dip galvanising according to EN ISO 1461.
This supports corrosion protection for permanent outdoor installation.
Approx. 4.8 kg weight
The product weight is approximately:
– 4.8 kg
according to the available product data.
Typical applications
The AS32116 can be used for suitable:
– satellite installations on terraces
– mechanically suitable balcony installations
– concrete foundations
– technical mounting platforms
– garages
– outbuildings
– DVB-T/T2 antennas
– DAB/DAB+ antennas
– FM and radio antennas
Balcony and terrace installations
Before drilling into balconies or terraces, the structural substrate and any waterproofing must be checked.
The mount must not be fixed only into:
– insulation
– paving
– non-structural screed
unless a suitable structural fixing system is provided.
Technical specifications
Article reference: AS32116
Article number: 32116
EAN: 4050822321162
Product type: Steel satellite floor mount
Material: Steel
Surface: Hot-dip galvanised according to EN ISO 1461
Height: 1000 mm
Mast tube: Ø 60 × 2.0 mm
Bracing: Four braces
Base plate: 200 × 200 × 3 mm
Fixing hole centre spacing: 147 × 92 mm
Designed for: M8 screws
Suitable satellite dish size: Up to Ø 120 cm according to product data
Weight: Approx. 4.8 kg
Installation: Mechanically anchored
Package contents
1 × AS32116 steel floor mount with integrated 1 m mast and base plate
Satellite dish, LNB, M8 fixing hardware or suitable floor anchors, coaxial cable and additional installation accessories are not included unless separately specified.

Dimensions 200 × 200 × 1020 mm
Mast length in m

1.00 m

Material

steel

Weight 4,8 kg
mounting type

screw

EU product manager

Bräunlich GmbH
https://www.braeunlich-gmbh.com
info@braeunlich-gmbh.com
Am Heideberg 26
DE 06886 Lutherstadt Wittenberg