The QUICK TSS10C-4.2D-01 is a High Performance rapid cartridge soldering tip in a 200W version for the QUICK TS10 soldering station and is designed for versatile soldering work with medium thermal demand. With its straight chisel geometry, 4.2 mm width and 1.3 mm chisel thickness, it offers a very good combination of high heat transfer, good guidance and robust everyday usability. This makes it especially suitable for professional applications in electronics, service, repair, rework and assembly where a little more thermal reserve is required than with finer tip shapes.
The chisel tip shape is one of the proven standard geometries in soldering because it supports both controlled work and efficient heat delivery. The flat working edge allows clean positioning on pads, traces, component leads and contacts. At the same time, it provides more contact area than narrower tips, so heat can be transferred into the solder joint faster and more evenly.
In combination with the QUICK TS10 system, the TSS10C-4.2D-01 is especially interesting for users who need a stronger but still well-controlled chisel tip. The 200W version provides reliable heat recovery even on slightly larger solder joints or connections that noticeably dissipate heat. It is well suited for through-hole components, plug contacts, cable terminations, stranded wires, solder tabs and rework.
The TSS10 series combines soldering tip and heater in one direct unit. In combination with the QUICK TS10, approx. 3 seconds to 300°C are possible with a 1.6 mm tip. Temperature measurement directly in the tip supports precise control and fast reheating. An integrated thermocouple and the integrated chip for the individual calibration value support reliable and reproducible temperature indication at the station.
Technical Highlights
– for QUICK TS10 soldering station
– High Performance rapid cartridge soldering tip
– straight chisel shape
– 4.2 mm wide, chisel thickness 1.3 mm
– 200W version for medium thermal demand
– suitable for through-hole components, plug contacts, cable terminations, solder tabs and rework
– approx. 3 seconds to 300°C with 1.6 mm tip on QUICK TS10
– temperature measurement directly in the tip
– integrated thermocouple
– integrated chip for calibration value
