Adjustable S-Shaped Satellite Wall Mount – up to 400 mm Wall Offset, Ø 38 × 2 mm, Hot-Dip Galvanised Steel
The AS23240 is an adjustable steel wall mount designed for permanent installation of suitable satellite dishes.
Its S-shaped tube construction allows the distance between the antenna mounting position and the wall to be adjusted according to the installation requirements.
According to the available product data, the wall offset can be adjusted up to a maximum of 400 mm.
The mounting tube has an outside diameter of Ø 38 mm, a wall thickness of 2.0 mm and a height of 240 mm.
The mount is manufactured from steel with hot-dip galvanising according to EN ISO 1461 and is specified for satellite dishes up to Ø 90 cm.
Adjustable wall offset up to 400 mm
The wall distance can be adjusted up to:
400 mm
This can be useful where additional clearance is required because of:
roof overhangs
projecting walls
building edges
architectural features
additional dish adjustment space
Use only as much offset as necessary
A larger offset provides more clearance but also increases leverage on the wall fixing.
For mechanical reasons, the shortest suitable setting is generally preferable.
S-shaped mounting tube
The mounting tube has an S-shaped design.
Tube specifications:
Outside diameter: Ø 38 mm
Wall thickness: 2.0 mm
Height: 240 mm
The satellite dish clamp must be compatible with a Ø 38 mm tube.
Hot-dip galvanised steel
The mount is manufactured from steel with a hot-dip galvanised surface according to EN ISO 1461.
This supports corrosion protection for permanent outdoor installation.
Suitable for satellite dishes up to Ø 90 cm
According to the available product data, the AS23240 is suitable for satellite dishes up to 90 cm in diameter.
This value should not be interpreted as a universal structural approval for every wall or location.
Actual suitability also depends on:
dish weight
wind area
selected wall offset
installation height
wall construction
fixing system
Greater offset means greater leverage
At the maximum 400 mm setting, wind and weight loads generate a greater bending moment at the wall fixing than at a shorter setting.
The supporting wall and anchors must therefore be suitable for the actual installation.
Wall fixing must suit the substrate
Different wall materials may require different fixing systems.
Examples include:
concrete
solid masonry
hollow masonry
aerated concrete
natural stone
insulated façades
Insulated façades require special attention
With ETICS or other insulated wall systems, the mechanical load should be transferred into the structural wall rather than only into the insulation.
Typical applications
The AS23240 can be used for:
satellite wall installations
mounting below a roof overhang
installations next to projecting walls
gable installations
replacing a fixed-offset wall bracket
retrofit satellite installations
Technical specifications
Article reference: AS23240
Article number: 23240
EAN: 4050822232406
Product type: Adjustable satellite wall mount
Material: Steel
Surface: Hot-dip galvanised according to EN ISO 1461
Wall offset: Adjustable up to max. 400 mm
Height: 240 mm
Mounting tube: S-shaped
Tube diameter: Ø 38 mm
Tube wall thickness: 2.0 mm
Suitable satellite dish size: Up to Ø 90 cm according to product data
Wall plate dimensions: Not specified
Package contents
1 × AS23240 adjustable S-shaped satellite wall mount
Satellite dish, LNB, wall fixing hardware, coaxial cable and additional installation accessories are not included unless separately specified.
