Hot-Dip Galvanised Steel Satellite Wall Mount – 300 mm Offset, Ø 48 × 2 mm, for Dishes up to Ø 100 cm
The AS24030 is a robust steel wall mount designed for permanent installation of suitable satellite dishes on structurally suitable building walls.
According to the available product data, the bracket provides a wall offset of 300 mm and a mounting tube height of 280 mm.
The antenna tube measures Ø 48 mm with a wall thickness of 2.0 mm.
The wall plate measures 200 × 200 × 3.0 mm and includes elongated mounting holes, a pressed reinforcing rib and a reinforcing collar.
The structure is manufactured from steel with hot-dip galvanising according to EN ISO 1461.
According to the available product data, the AS24030 is suitable for satellite dishes up to Ø 100 cm.
300 mm wall offset
The wall offset is:
300 mm
This provides useful clearance between the building and satellite dish while keeping the installation more compact than very long wall brackets.
Typical applications include installations with:
moderate roof overhangs
projecting wall sections
additional clearance requirements behind the dish
limited façade obstacles
Ø 48 × 2.0 mm mounting tube
Tube specifications:
Outside diameter: Ø 48 mm
Wall thickness: 2.0 mm
Height: 280 mm
The satellite dish clamp must be compatible with a Ø 48 mm mounting tube.
Suitable for satellite dishes up to Ø 100 cm
According to the product data, the wall mount is intended for satellite dishes up to 100 cm in diameter.
Actual mechanical suitability also depends on:
dish weight
wind area
installation height
wall construction
anchor system
local wind exposure
Hot-dip galvanised according to EN ISO 1461
The steel construction is hot-dip galvanised according to EN ISO 1461 according to the available product data.
This supports corrosion protection for permanent outdoor installation.
Wall plate 200 × 200 × 3 mm
Wall plate dimensions:
200 × 200 mm
3.0 mm thickness
Elongated mounting holes
The wall plate includes elongated holes to assist positioning and alignment during installation.
Pressed reinforcing rib
A pressed rib in the wall plate helps increase stiffness and reduce unwanted deformation of the plate.
Reinforcing collar
A reinforcing collar supports the mechanically stressed transition between the bracket and wall plate.
Leverage must be considered
A 300 mm offset creates leverage on the wall fixing.
Wind and antenna weight are transferred through the bracket into the wall and anchor system.
The wall and fixings must therefore be suitable for the actual load.
Wall fixing must match the substrate
Different wall constructions may require different fixing systems, including:
concrete
solid masonry
hollow masonry
aerated concrete
natural stone
insulated façades
Typical applications
The AS24030 can be used for:
residential satellite installations
garage or outbuilding installations
gable mounting
mounting below moderate roof overhangs
replacement of existing satellite wall brackets
new satellite installations
Technical specifications
Article reference: AS24030
Article number: 24030
EAN: 4050822240302
Product type: Satellite wall mount
Material: Steel
Surface: Hot-dip galvanised according to EN ISO 1461
Wall offset: 300 mm
Height: 280 mm
Mounting tube: Ø 48 mm
Tube wall thickness: 2.0 mm
Wall plate: 200 × 200 × 3.0 mm
Wall plate features: Elongated holes, pressed reinforcing rib and reinforcing collar
Suitable satellite dish diameter: Up to Ø 100 cm according to product data
Package contents
1 × AS24030 hot-dip galvanised steel satellite wall mount
Satellite dish, LNB, wall fixing hardware, coaxial cable and additional installation accessories are not included unless separately specified.
