Silver-Grey Aluminium Satellite Wall Mount – 450 mm Offset, Ø 50 × 2.5 mm, for Dishes up to Ø 90 cm
The AS10145 is an aluminium satellite wall mount designed for permanent installation of suitable satellite dishes where increased clearance from the building façade is required.
According to the available product data, the bracket provides a wall offset of 450 mm and a tube height of 250 mm.
The antenna tube measures Ø 50 mm with a 2.5 mm wall thickness.
The wall plate measures 150 × 150 × 5 mm and includes elongated mounting holes and a reinforcing collar.
According to the available product data, the mount is suitable for satellite dishes up to Ø 90 cm.
450 mm wall offset
The 450 mm offset provides additional clearance between the satellite dish and the building.
This can be useful with:
roof overhangs
projecting walls
recessed façades
installations requiring more adjustment space
building elements that prevent the use of a short wall mount
Ø 50 × 2.5 mm antenna tube
Tube specifications:
Outside diameter: Ø 50 mm
Wall thickness: 2.5 mm
Height: 250 mm
The satellite dish mast clamp must be compatible with a Ø 50 mm tube.
Aluminium construction
The AS10145 is manufactured from an aluminium alloy according to the available product data.
Silver-grey powder-coated finish
The surface is silver-grey powder coated.
This provides a uniform appearance and supports surface protection for outdoor installation.
Wall plate 150 × 150 × 5 mm
Wall plate dimensions:
150 × 150 mm
5 mm thickness
Elongated mounting holes
The wall plate includes elongated holes to assist positioning and alignment during installation.
Reinforcing collar
A reinforcing collar supports the mechanically stressed transition between the bracket construction and wall plate.
Suitable for satellite dishes up to Ø 90 cm
According to the available product data, the AS10145 is suitable for satellite dishes up to 90 cm.
This size specification should not be interpreted as a universal structural approval for every installation.
Actual suitability also depends on:
dish weight
wind area
installation height
wall construction
fixing system
local wind conditions
Increased leverage
A 450 mm wall offset creates more leverage than a compact short wall mount.
The wall and fixing system must therefore be suitable for the actual loads.
Wall fixing must match the substrate
Different wall materials require different fixing systems.
Particular attention is required with:
hollow masonry
aerated concrete
insulated façades
ETICS systems
older masonry
No current TÜV or wind-load certification assumed
Older product information refers to TÜV and wind-load testing.
As no current confirmed test documentation is available for the present product, these claims are not used as current product features.
Typical applications
The AS10145 can be used for:
satellite wall installations
gable mounting
installation below a roof overhang
mounting next to projecting building elements
installations requiring increased wall clearance
Technical specifications
Article reference: AS10145
Article number: 10145
EAN: 4050822101450
Product type: Satellite wall mount
Material: Aluminium alloy
Finish: Silver-grey powder coated
Wall offset: 450 mm
Height: 250 mm
Antenna tube: Ø 50 mm
Tube wall thickness: 2.5 mm
Wall plate: 150 × 150 × 5 mm
Wall plate features: Elongated holes and reinforcing collar
Suitable satellite dish size: Up to Ø 90 cm according to product data
Current TÜV / wind-load certification: Not confirmed
Package contents
1 × AS10145 aluminium satellite wall mount
Satellite dish, LNB, wall fixing hardware, coaxial cable and additional installation accessories are not included unless separately specified.
