700 mm Aluminium Satellite Wall Mount – Ø 50 × 2.5 mm, Triple-Braced, for Dishes up to Ø 90 cm
The AS10070 is a long-reach aluminium wall mount designed for permanent installation of suitable satellite dishes where increased clearance from the building façade is required.
According to the available product data, the bracket provides a wall offset of 700 mm and a mounting tube height of 250 mm.
The antenna tube measures Ø 50 mm with a 2.5 mm wall thickness and is supported by three braces arranged at 120°.
The wall plate measures 190 × 190 × 5 mm and includes elongated mounting holes and a reinforcing collar.
According to the available product data, the mount is suitable for satellite dishes up to Ø 90 cm.
700 mm wall clearance
The 700 mm wall offset provides substantially more clearance than a conventional compact satellite wall mount.
This can be useful where the installation has to clear:
roof overhangs
projecting building elements
cornices
recessed façades
other architectural obstructions
Significant leverage
The large 700 mm offset also creates substantial leverage on the wall fixing.
The complete installation must therefore be selected according to the actual mechanical load.
Relevant factors include:
dish weight
wind area
installation height
wall construction
anchor system
local wind conditions
Ø 50 × 2.5 mm antenna tube
Tube specifications:
Outside diameter: Ø 50 mm
Wall thickness: 2.5 mm
Height: 250 mm
The satellite dish mast clamp must be compatible with a Ø 50 mm tube.
Triple-braced construction
According to the product data, the tube is supported by three braces arranged at 120°.
The bracing supports the stiffness of the long-reach construction.
It should not, however, be interpreted as a universal structural or wind-load approval.
Wall plate 190 × 190 × 5 mm
Wall plate dimensions:
190 × 190 mm
5 mm thickness
The plate includes elongated holes to assist positioning during installation and a reinforcing collar at the mechanically stressed transition area.
Aluminium construction
The mount is manufactured from an aluminium alloy according to the available product data.
Stainless-steel-look finish
The surface has a stainless-steel-look appearance.
This describes the visual finish only. The actual material is aluminium, not stainless steel.
Suitable for satellite dishes up to Ø 90 cm
According to the product data, the AS10070 is suitable for satellite dishes up to 90 cm in diameter.
This does not represent a universal structural approval for every wall, installation height or wind condition.
Wall fixing must suit the substrate
Suitable anchors and fasteners must be selected according to the actual wall construction.
Particular attention is required with:
hollow masonry
aerated concrete
insulated façades
ETICS systems
older masonry
No current wind-load certification assumed
Older product information refers to wind-load testing. Since no current verified test information is available for the present product, no current wind-load certification is claimed here.
Typical applications
The AS10070 can be used for:
satellite installation with large wall clearance
mounting below a roof overhang
gable installations
installations behind projecting building elements
situations where a standard short wall bracket does not provide sufficient clearance
Technical specifications
Article reference: AS10070
Article number: 10070
EAN: 4050822100705
Product type: Satellite wall mount
Material: Aluminium alloy
Finish: Stainless-steel look
Wall offset: 700 mm
Height: 250 mm
Antenna tube: Ø 50 mm
Tube wall thickness: 2.5 mm
Bracing: 3 braces arranged at 120° according to product data
Wall plate: 190 × 190 × 5 mm
Wall plate features: Elongated holes and reinforcing collar
Suitable satellite dish size: Up to Ø 90 cm according to product data
Current wind-load certification: Not confirmed
Package contents
1 × AS10070 aluminium satellite wall mount with 700 mm wall offset
Satellite dish, LNB, wall fixing hardware, coaxial cable and additional installation accessories are not included unless separately specified.
