The QUICK TSS10C-SK is a High Performance rapid cartridge soldering tip in a 200W version for the QUICK TS10 soldering station and is designed for soldering work with fine to medium thermal demand. With its 45° knife-shaped geometry, 5.0 mm width and 2.5 mm blade thickness, it is especially suitable for applications where heat should be applied in a controlled way along an edge or across a longer contact zone.
The knife-shaped tip differs from classic chisel or pencil-point geometries by its elongated working edge. This allows the tip to be used very flexibly. Depending on the working angle, the user can work more with the edge or with a larger area of the tip. This makes the geometry especially useful for soldering tasks involving linear contacts, narrow connection areas or longer solder joints.
In combination with the QUICK TS10 system, the TSS10C-SK is a practical solution for users who need a controllable tip shape with solid heat transfer. The 200W version supports clean work on typical electronics connections and provides enough power reserve for reliable heating of standard contact areas.
The TSS10 series combines soldering tip and heater in one direct unit. In combination with the QUICK TS10, approx. 3 seconds to 300°C are possible with a 1.6 mm tip. Temperature measurement directly in the tip supports precise control and fast reheating. An integrated thermocouple and the integrated chip for the individual calibration value support reliable and reproducible temperature indication at the station.
Technical Highlights
– for QUICK TS10 soldering station
– High Performance rapid cartridge soldering tip
– straight knife shape, 45° angled
– 5.0 mm wide, blade thickness 2.5 mm
– 200W version for fine to medium thermal demand
– suitable for connector rows, solder tabs, cable terminations and rework
– approx. 3 seconds to 300°C with 1.6 mm tip on QUICK TS10
– temperature measurement directly in the tip
– integrated thermocouple
– integrated chip for calibration value
