The QUICK TSS10B-10D-01 is a High Performance rapid cartridge soldering tip designed for the QUICK TS10 soldering station with 300W heating power. Its straight chisel shape is 10 mm wide with a chisel thickness of 3.0 mm, providing a large contact area for demanding soldering applications with high thermal requirements.
The broad working surface is particularly suitable for large solder pads, connectors, metal sheets, ground areas, transformers and circuit boards with pronounced thermal sinks. The large contact area supports efficient heat transfer when the workpiece absorbs substantial amounts of thermal energy.
Compared with the 3.5 mm version, this tip has a slightly slimmer chisel thickness of 3.0 mm while retaining the same 10 mm working width. This makes it suitable when a broad contact area is required but a slightly slimmer tip shape is preferred.
A key feature of the TSS10 system is the direct connection between the soldering tip and heating element. This design provides high thermal efficiency and allows heat to be supplied quickly when the solder joint creates a high thermal load. With the QUICK TS10, approximately 300 °C can be reached in about 3 seconds when using a 1.6 mm tip.
An integrated thermocouple measures the temperature directly inside the soldering tip and supports rapid adjustment of the required heating power. An integrated chip additionally stores the individual temperature calibration value of the tip. This value is available to the station whenever the tip is used again, supporting precise temperature indication and reproducible soldering results.
The accurate temperature control and standby function of the QUICK TS10 also help reduce unnecessary thermal stress on the soldering tip and support longer tip service life.
Technical Highlights
– for QUICK TS10 soldering station with 300W heating power
– High Performance rapid cartridge soldering tip
– straight chisel shape
– 10 mm wide
– chisel thickness 3.0 mm
– broad contact area for high thermal demand
– slightly slimmer than the 3.5 mm version
– suitable for transformers, metal sheets and thermal sinks
– direct connection between tip and heating element
– high thermal efficiency
– temperature measurement directly in the tip
– integrated thermocouple
– integrated chip for individual temperature calibration value
– standby function supports longer tip service life
