Pair of Galvanised Steel Mast Spacers for Tubes Ø 42–60 mm
The AS46200 is a two-piece mast spacer set designed to support, guide or space suitable antenna and satellite mast tubes with outside diameters from Ø 42 to 60 mm.
The set consists of one pair of steel mast spacers with M8 threaded rods approximately 200 mm long.
According to the available product data, the maximum usable spacing is approximately 150 mm.
For mast tubes Ø 42–60 mm
Suitable tube outside diameter:
Ø 42 mm minimum
Ø 60 mm maximum
The actual mast diameter should be checked before installation.
Two-piece set
The package contains:
2 mast spacers
1 pair
Using two mounting points can help guide and support the mast within a suitable overall mounting structure.
M8 threaded rods
Threaded rod specification:
M8
Approx. 200 mm long
These rods provide adjustment within the intended mounting geometry.
Maximum usable spacing approx. 150 mm
The available product information specifies a maximum usable spacing of approximately:
150 mm
The reference points used for this dimension are not clearly defined in the available data, so the value is not described as a guaranteed final wall-to-mast-axis distance.
Galvanised steel
The spacers are manufactured from steel with a galvanised surface according to the available product data.
No specific coating thickness or corrosion class is stated.
Satellite mast applications
A typical application is supporting or spacing a satellite mast where a defined distance from a suitable mounting structure is required.
Other antenna applications
Depending on the complete mechanical design, the spacer set may also be used for mast tubes supporting:
DVB-T/T2 antennas
DAB/DAB+ antennas
FM antennas
suitable radio antennas
Technical tube constructions
The AS46200 may also be used with suitable technical round tubes within the specified diameter range.
The permissible load must be assessed for the complete structure.
No confirmed maximum load
No separate maximum load rating is available.
Actual mechanical suitability depends on factors including:
mast length
antenna weight
wind area
spacing between support points
substrate
fixing hardware
Increased spacing increases leverage
Larger spacing between the mast and supporting structure increases the leverage acting on brackets and fixings.
Only the spacing required for the installation should therefore be used.
Suitable substrate required
When used for wall mounting, the supporting substrate and fixings must be suitable for the expected load.
Insulated façades may require specialised stand-off fixing systems that transfer the load through the insulation into a structural substrate.
Technical specifications
Article reference: AS46200
Article number: 46200
EAN: 4250078300991
Product type: Mast spacer
Configuration: Two-piece / one pair
Material: Steel
Surface: Galvanised
Suitable tube diameter: Ø 42–60 mm
Threaded rods: M8
Threaded rod length: Approx. 200 mm
Maximum usable spacing: Approx. 150 mm according to product data
Maximum load: Not specified
Maximum antenna size: Not specified
Package contents
1 pair / 2 × AS46200 galvanised steel mast spacers with M8 threaded rods according to product configuration
Mast tube, antenna, satellite dish, substrate-specific wall fixings and additional installation accessories are not included unless separately stated.
