Black Frankfurter-Profile Plastic Roof Tile – Antenna Mast Penetration up to Ø 60 mm
The AS42300 is a black plastic roof tile designed to provide a mast penetration through pitched roofs using a compatible Frankfurter-style roof tile profile.
It can replace a suitable roof tile at the antenna installation point and provides a defined opening for satellite and antenna mast tubes.
According to the available product data, the tile measures approximately 405 × 325 × 175 mm, weighs approximately 0.6 kg and is suitable for mast tubes up to Ø 60 mm.
The product data specifies use on roof pitches up to 56°.
Frankfurter-style roof tile profile
The product is intended for roofs using a compatible Frankfurter-style tile profile.
The actual existing roof tile should be compared with the shape and dimensions of the AS42300 before installation.
The profile name alone does not guarantee universal compatibility with every roof covering described as a Frankfurter tile.
Suitable for mast tubes up to Ø 60 mm
According to the available product data, the mast opening is suitable for tubes up to:
Ø 60 mm
The actual mast diameter should be checked before installation.
Roof pitches up to 56°
The available product data specifies use on roof pitches up to:
56°
Correct installation still depends on the roof covering, overlap and water drainage arrangement.
Dimensions
Approximate dimensions:
405 × 325 × 175 mm
Approx. 0.6 kg
The product weight is approximately:
0.6 kg
according to the available data.
Black finish
The black colour makes the roof tile particularly suitable for visually integrating the antenna penetration into dark roof coverings.
Plastic construction
The roof tile is manufactured from plastic.
Legacy information also refers to PVC, but the precise polymer specification is not confirmed here.
Additional mast collar required
A suitable rubber collar or weather-resistant mast sleeve should be used around the mast tube.
The collar must be selected according to the actual mast diameter and installation.
Not universally waterproof on its own
The roof tile is part of the weather-protection system, but the complete mast penetration depends on correct installation.
Relevant factors include:
correct roof tile overlap
suitable mast collar
roof pitch
water drainage
underlay treatment
Not a structural mast support
The AS42300 does not mechanically support the antenna mast.
A separate structural mast mounting system is required.
Wind loads from the antenna must be transferred into that support structure and not into the plastic roof tile.
Roof underlay must also be considered
Where an underlay membrane or secondary weather layer is present, it must also be correctly treated around the mast penetration.
Typical applications
The AS42300 can be used for:
satellite antenna mast penetrations
DVB-T/T2 antenna installations
DAB/DAB+ antennas
FM antenna installations
replacing an existing antenna roof tile
retrofitting antenna systems
suitable technical roof penetrations
Technical specifications
Article reference: AS42300
