2 pieces available

Amber ESD Handling Set 6 pcs.

Catalog no.: B9-361-A GTIN: 4250838528917
1 pcs.107,81 

incl. VAT

zzgl. Versandkosten

Amber ESD Handling Set 6-pcs.

– ESD-safe protective and workplace mat for soldering and assembly
– Bleed resistor 10^6 to 10^7 Ohm (back conductive 10^3 to 10^4 Ohm)
– Top side platinum gray, back side black, made of electrostatically dissipative synthetic rubber
– with 2 snap fasteners 10 mm for grounding connection
– Solder-resistant workstation mat incl. professional accessories for grounding personnel
– Heat-resistant, abrasion-resistant, scratch-resistant
– Wear-resistant and permanently elastic, halogen-free
– Dimensions 900 x 610 x 2 mm
– Weight 1472 g

Area of application

Wrist grounding, as a safe method to discharge electrostatic charge from persons, consists of an adjustable wristband with woven silver-plated plastic fibers (close skin contact necessary) and a spiral cable that connects the wristband to the grounding point via snap fasteners (DK) in an electrically conductive manner. The spiral cable contains a safety resistor of 1 MOhm on each connection side and is approved for use at workplaces with a nominal voltage of up to 250 VAC. ESD mat suitable for table, shelf or floor use

Technical product description

Products meet the requirements according to DIN EN 61340-5-1. Technical data of the mat: abrasion (load: 5N) 130 mm³, hardness 78 Shore A, indentation test 0.1 mm, light reflectance 19% – 29%, temperature range of use – up to + 60°C. Adjustable elastic wrist strap with woven-in silver-plated plastic fibers, allergy-free. Meets the safety requirements for wrist grounding according to BGFE. To ensure adequate insulation, the wrist strap must be stored in a dry place. Washing instructions for the wrist strap: Standard machine wash up to 30° C with color and mild detergent, dry at low temperature (gentle), do not bleach! Avoid contact with acidic / alkaline solvents. ESD protection is retained for approx. 30 wash cycles.

General information

Suitable for use in electrostatically protected areas (ESD workstation/ESD protected area).

ESD Handling Set consisting of:

– 9-361-0 ESD grounding mat gray 900x610x2mm
– 9-341-1 ESD contact wrist strap yellow
– 9-341-2 ESD coiled cable for wrist strap highly elastic 2400mm yellow
– 9-344-1 ESD grounding cable 1 MOhm, 1800mm 1DK 10mm and eyelet 4mm
– 9-359-1 ESD grounding module, grounding box with cable and 3 x 1 MOhm connection
– 9-359-2 ESD grounding plug 2x10mm and M5 connection

Dimensions 635 × 100 × 100 mm
Weight 1,71 kg
anitstatic design

Yes

EU product manager

Bernstein Steinrücke GmbH
https://www.bernstein-werkzeuge.de
Industriehof Trecknase 1
DE 42897 Remscheid