4-Hole Steel Mast Clamp for Tubes Ø 58–60 mm – Galvanically Zinc Plated
The AS46060 is a robust four-hole mast clamp designed to secure antenna and round mast tubes with an outside diameter between Ø 58 and 60 mm to a suitable load-bearing structure.
Typical applications include mounting a suitable antenna mast to a roof rafter, timber beam or comparable structural support.
According to the available product data, the clamp is manufactured from 3 mm steel sheet and has a galvanically zinc-plated surface.
Two screws are included according to the available information. Their exact dimensions and suitability for a particular substrate are not confirmed and should be checked before installation.
For mast tubes Ø 58–60 mm
The clamp is intended for tubes with an outside diameter between:
Ø 58 mm
Ø 60 mm
This makes it particularly suitable for antenna mast systems in the 60 mm diameter class.
Four-hole design
The clamp has four mounting holes.
These allow attachment to a suitable structural support at multiple fixing points.
The actual mounting hardware must be appropriate for the substrate and load.
3 mm steel sheet
The clamp is manufactured from:
3 mm steel sheet
according to the available product data.
Galvanically zinc plated
The steel surface is galvanically zinc plated to support corrosion protection in typical antenna installations.
No confirmed coating thickness is stated.
Two screws included
According to the product data, the package includes:
2 screws
Their use should be checked against the actual substrate. Additional or different fixing hardware may be required depending on the installation.
Typical roof rafter application
One common use is securing an antenna mast to a structurally sound roof rafter.
The rafter itself must be capable of carrying the loads transferred by:
the mast
the antenna
wind forces
Not a complete mast support system
The AS46060 is an individual mechanical mounting component.
Depending on mast length and antenna loading, additional clamps or support points may be required.
Satellite antenna installations
The clamp can form part of a suitable satellite mast structure.
No confirmed maximum satellite dish diameter is specified.
Suitability depends on the complete installation, including:
mast wall thickness
unsupported mast length
support spacing
antenna weight
wind area
structural support
Other antenna applications
The clamp may also be used in suitable installations for:
DVB-T/T2 antennas
DAB/DAB+ antennas
FM antennas
suitable radio antennas
Repair and replacement
The AS46060 can be used when replacing a damaged mast clamp or adding a suitable additional support point to an existing Ø 58–60 mm mast installation.
Technical specifications
Article reference: AS46060
Article number: 46060
EAN: 4050822460601
Product type: 4-hole mast clamp / pipe clamp
Suitable tube diameter: Ø 58–60 mm
Material: Steel sheet
Material thickness: 3 mm
Surface: Galvanically zinc plated
Mounting design: 4-hole
Included screws: 2 according to product data
Maximum load: Not specified
Maximum antenna size: Not specified
Package contents
1 × AS46060 galvanically zinc-plated 4-hole mast clamp for Ø 58–60 mm tubes
2 × screws according to available product data
Mast tube, satellite dish, other antennas and additional fixing or installation accessories are not included unless separately specified.
