Professional Cross Mast Clamp – for Two Tubes up to Ø 60 mm, 3 mm Steel, 4 U-Bolts Ø 8 mm
The AS46011 is a robust cross mast clamp designed to connect two round or mast tubes in a crossed arrangement.
According to the available product data, both tubes may have an outside diameter of up to Ø 60 mm.
The clamp plates are manufactured from 3 mm steel sheet with a galvanically zinc-plated surface. Four U-bolts with a specified diameter of Ø 8 mm provide the clamping connection.
For two tubes up to Ø 60 mm
The clamp is designed for:
first tube: up to Ø 60 mm
second tube: up to Ø 60 mm
The actual outside diameters should be checked before installation.
Cross connection
The AS46011 is intended for a crossed rather than parallel pipe connection.
Typical applications include attaching:
auxiliary mast tubes
cross members
antenna support tubes
additional mounting tubes
to an existing mast.
3 mm steel plates
The clamp body is manufactured from:
3 mm steel sheet
according to the available product data.
Galvanically zinc plated
The steel components have a galvanically zinc-plated surface to support corrosion protection in typical outdoor installations.
Four U-bolts Ø 8 mm
The clamp includes:
4 U-bolts
Ø 8 mm according to product data
The four clamping points secure the two crossed tubes.
Helps resist unwanted rotation
The clamp arrangement supports a firm mechanical connection and helps resist unwanted tube rotation.
Actual holding performance depends on:
tube diameter
tube wall thickness
surface condition
tightening force
tube length
attached load
wind exposure
The installation should therefore not be regarded as absolutely rotation-proof under all conditions.
Lever forces must be considered
A long auxiliary tube creates additional leverage at the clamp.
The further an antenna or another component is positioned from the connection, the greater the bending and torsional loads.
Main support mast must be suitable
The existing mast must be mechanically capable of carrying the additional pipe and attached equipment.
A compatible diameter alone does not guarantee sufficient load capacity.
Typical applications
The AS46011 can be used for:
satellite and antenna mast extensions
auxiliary antenna tubes
DVB-T/T2 installations
DAB/DAB+ antennas
FM antennas
suitable radio installations
technical crossed pipe structures
replacement of an existing cross clamp
Technical specifications
Article reference: AS46011
Article number: 46011
EAN: 4050822460113
Product type: Professional cross mast clamp
Suitable tube diameter: Up to Ø 60 mm for both tubes
Material: Steel sheet
Material thickness: 3 mm
Surface: Galvanically zinc plated
U-bolts: 4
U-bolt diameter: Ø 8 mm according to product data
Maximum antenna size: Not specified
Package contents
1 × AS46011 professional cross mast clamp
4 × U-bolts Ø 8 mm
Mounting hardware according to product configuration
Mast tubes, antennas, satellite dish, LNB, cables and additional installation accessories are not included.
