Universal Hot-Dip Galvanised Mast Clamp for Tubes \u00d8 42\u201360 mm \u2013 Wall or Rafter Mounting<\/p>\n
The AS46301 is a universal steel pipe and mast clamp designed to secure suitable mast tubes and round-tube outriggers with outside diameters from \u00d8 42 to 60 mm.<\/p>\n
It can be used for satellite, antenna and technical mast installations where a suitable round tube must be fixed to a structurally sound wall, roof rafter or comparable supporting structure.<\/p>\n
According to the available product data, the clamp is manufactured from steel with a hot-dip galvanised surface.<\/p>\n
The fixing-hole centre spacing on the mounting side is approximately 140 mm, while the mounting holes have an approximate diameter of 10 mm.
\nFor tubes \u00d8 42\u201360 mm<\/p>\n
The clamp is suitable for mast tubes and round-tube outriggers with diameters from:<\/p>\n
\u00d8 42 mm<\/p>\n
to \u00d8 60 mm<\/p>\n
The actual tube diameter should be checked before installation.
\nWall mounting<\/p>\n
The AS46301 may be fixed to a suitable load-bearing wall.<\/p>\n
The actual screws, plugs or anchors must be selected according to:<\/p>\n
wall material<\/p>\n
tube length<\/p>\n
antenna weight<\/p>\n
wind area<\/p>\n
mounting height<\/p>\n
Roof rafter mounting<\/p>\n
The clamp may also be used on a structurally suitable roof rafter.<\/p>\n
The timber must be capable of carrying the mechanical loads transmitted by the mast and attached equipment.
\nHot-dip galvanised steel<\/p>\n
The clamp is manufactured from hot-dip galvanised steel.<\/p>\n
The coating supports corrosion protection for typical permanent outdoor installations.
\nApprox. 140 mm mounting-hole centre spacing<\/p>\n
The mounting-hole centre distance is approximately:<\/p>\n
140 mm<\/p>\n
This is particularly useful when replacing an existing clamp or comparing an existing drilling pattern.
\nApprox. \u00d8 10 mm mounting holes<\/p>\n
The mounting-hole diameter is approximately:<\/p>\n
10 mm<\/p>\n
This dimension does not determine a universal screw or anchor type.<\/p>\n
Fixings must be selected according to the actual substrate.
\nSuitable for mast tubes and outriggers<\/p>\n
Typical applications include:<\/p>\n
satellite antenna masts<\/p>\n
antenna support tubes<\/p>\n
round-tube outriggers<\/p>\n
DVB-T\/T2 antenna installations<\/p>\n
DAB\/DAB+ systems<\/p>\n
FM antennas<\/p>\n
suitable radio antenna structures<\/p>\n
Technical mast applications<\/p>\n
Depending on the complete mechanical design, the clamp may also be used for suitable lightweight technical mast applications such as camera, sensor or radio equipment.
\nNo confirmed maximum antenna size<\/p>\n
No maximum antenna or satellite dish size is specified.<\/p>\n
Suitability depends on the complete installation, including:<\/p>\n
mast wall thickness<\/p>\n
unsupported mast length<\/p>\n
outrigger length<\/p>\n
antenna weight<\/p>\n
wind area<\/p>\n
structural support<\/p>\n
fixing system<\/p>\n
Lever forces must be considered<\/p>\n
Long mast sections and extended outriggers create additional leverage at the fixing point.<\/p>\n
The mounting surface and fixing hardware must be selected accordingly.
\nInsulated fa\u00e7ades<\/p>\n
Special mounting solutions may be required for external thermal insulation systems.<\/p>\n
Loads must be transferred into a suitable structural substrate rather than being carried by the insulation layer alone.
\nTechnical specifications<\/p>\n
Article reference: AS46301
\nArticle number: 46301
\nEAN: 4050822463015
\nProduct type: Universal mast \/ pipe clamp
\nMaterial: Steel
\nSurface: Hot-dip galvanised
\nSuitable tube diameter: \u00d8 42\u201360 mm
\nInstallation: Suitable wall or roof rafter
\nMounting-hole centre spacing: Approx. 140 mm
\nMounting-hole diameter: Approx. 10 mm
\nMaximum load: Not specified
\nMaximum antenna size: Not specified
\nPackage contents<\/p>\n
1 \u00d7 AS46301 universal mast\/pipe clamp for tubes \u00d8 42\u201360 mm
\nClamping and mounting components according to product configuration<\/p>\n
Mast tube, outrigger, satellite dish, other antennas and substrate-specific screws, plugs or anchors are not included unless separately specified.<\/p>","protected":false},"excerpt":{"rendered":"
Universal Hot-Dip Galvanised Mast Clamp for Tubes \u00d8 42\u201360 mm \u2013 Wall or Rafter Mounting The AS46301 is a universal steel pipe and mast clamp designed to secure suitable mast tubes and round-tube outriggers with outside diameters from \u00d8 42 to 60 mm. It can be used for satellite, antenna and technical mast installations where […]<\/p>\n","protected":false},"featured_media":56569,"template":"","meta":{"ep_exclude_from_search":false},"product_cat":[235],"product_tag":[],"class_list":{"0":"post-2978","1":"product","2":"type-product","3":"status-publish","4":"has-post-thumbnail","6":"product_cat-antennenmast-zubehoer","7":"product_shipping_class-postwarenpost-individuell","9":"first","10":"instock","11":"taxable","12":"shipping-taxable","13":"purchasable","14":"product-type-simple"},"_links":{"self":[{"href":"https:\/\/www.gallun-shop.com\/en\/wp-json\/wp\/v2\/product\/2978"}],"collection":[{"href":"https:\/\/www.gallun-shop.com\/en\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/www.gallun-shop.com\/en\/wp-json\/wp\/v2\/types\/product"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.gallun-shop.com\/en\/wp-json\/wp\/v2\/media\/56569"}],"wp:attachment":[{"href":"https:\/\/www.gallun-shop.com\/en\/wp-json\/wp\/v2\/media?parent=2978"}],"wp:term":[{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/www.gallun-shop.com\/en\/wp-json\/wp\/v2\/product_cat?post=2978"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/www.gallun-shop.com\/en\/wp-json\/wp\/v2\/product_tag?post=2978"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}