Hot-Dip Galvanised Pipe Clamp and Wall Mounting Plate for \u00d8 38\u201360 mm Outriggers<\/p>\n
The AS46300 is a robust steel mounting plate designed to secure suitable round-tube outriggers and mast sections with outside diameters from \u00d8 38 to 60 mm.<\/p>\n
It can be used as a component in satellite, antenna and technical wall-mounting structures, particularly with suitable S-shaped or U-shaped outriggers.<\/p>\n
According to the available product data, the plate measures approximately 168 \u00d7 130 mm and uses two serrated clamps to grip the attached tube.<\/p>\n
The mounting-hole centre spacing is approximately 147 \u00d7 92 mm, and the holes are intended for M8 fixings.<\/p>\n
For tubes and outriggers \u00d8 38\u201360 mm<\/p>\n
The clamp is suitable for:<\/p>\n
mast tubes<\/p>\n
S-shaped outriggers<\/p>\n
U-shaped outriggers<\/p>\n
suitable round-tube supports<\/p>\n
with diameters from:<\/p>\n
\u00d8 38 mm<\/p>\n
to \u00d8 60 mm<\/p>\n
Two serrated clamps<\/p>\n
The tube is secured using:<\/p>\n
2 serrated clamps<\/p>\n
The serrated surfaces support grip and help resist unwanted tube rotation.<\/p>\n
Actual holding performance depends on:<\/p>\n
tube diameter<\/p>\n
surface condition<\/p>\n
wall thickness<\/p>\n
tightening force<\/p>\n
outrigger length<\/p>\n
antenna weight<\/p>\n
wind load<\/p>\n
Hot-dip galvanised steel<\/p>\n
The mounting plate is manufactured from hot-dip galvanised steel for suitable permanent outdoor installations.<\/p>\n
Mounting plate dimensions<\/p>\n
Approximate dimensions:<\/p>\n
168 \u00d7 130 mm<\/p>\n
Mounting-hole spacing<\/p>\n
The centre spacing of the mounting holes is approximately:<\/p>\n
147 \u00d7 92 mm<\/p>\n
This is particularly important when replacing an existing wall-mount plate.<\/p>\n
For M8 fixings<\/p>\n
The mounting holes are intended for:<\/p>\n
M8 screws<\/p>\n
The required screws, anchors or plugs must be selected according to the wall structure and expected load.<\/p>\n
Suitable for adjustable wall-bracket assemblies<\/p>\n
When combined with an appropriate S- or U-shaped tube, the AS46300 may form part of an adjustable or pivoting wall-mount structure.<\/p>\n
The actual adjustment range and wall offset depend on the tube geometry and complete assembly.<\/p>\n
Approx. 37 mm dimensional value<\/p>\n
Available product information specifies a mast\/tube spacing of approximately:<\/p>\n
37 mm<\/p>\n
This should be treated as a dimensional product value.<\/p>\n
The final antenna wall offset depends mainly on the attached outrigger.<\/p>\n
Structural wall suitability<\/p>\n
The wall or support structure must be capable of carrying the loads generated by:<\/p>\n
antenna weight<\/p>\n
wind area<\/p>\n
outrigger leverage<\/p>\n
mounting height<\/p>\n
Special fixing solutions may be required for insulated fa\u00e7ades or hollow masonry.<\/p>\n
No maximum antenna size specified<\/p>\n
No confirmed maximum satellite dish or antenna size is stated for the AS46300.<\/p>\n
Suitability depends on the complete wall-mount assembly.<\/p>\n
Typical applications<\/p>\n
The AS46300 may be used for:<\/p>\n
satellite wall brackets<\/p>\n
S-shaped outriggers<\/p>\n
U-shaped outriggers<\/p>\n
repair of existing antenna wall mounts<\/p>\n
DVB-T\/T2 antenna brackets<\/p>\n
DAB\/DAB+ antennas<\/p>\n
FM antennas<\/p>\n
suitable radio or directional antenna systems<\/p>\n
Technical specifications<\/p>\n
Article reference: AS46300
\nArticle number: 46300
\nEAN: 4050822463008
\nProduct type: Pipe clamp \/ wall mounting plate
\nMaterial: Steel
\nSurface: Hot-dip galvanised
\nSuitable tube diameter: \u00d8 38\u201360 mm
\nTube clamping: 2 serrated clamps
\nPlate dimensions: Approx. 168 \u00d7 130 mm
\nMounting-hole centre spacing: Approx. 147 \u00d7 92 mm
\nMounting holes: For M8 fixings
\nSpacing value: Approx. 37 mm according to product data
\nMaximum load: Not specified
\nMaximum antenna size: Not specified<\/p>\n
Package contents<\/p>\n
1 \u00d7 AS46300 pipe clamp \/ wall mounting plate
\n2 \u00d7 serrated clamps
\nClamping and mounting components according to product configuration<\/p>\n
S- or U-shaped outrigger, antenna mast, satellite dish and substrate-specific screws, anchors or plugs are not included unless separately specified.<\/p>","protected":false},"excerpt":{"rendered":"
Hot-Dip Galvanised Pipe Clamp and Wall Mounting Plate for \u00d8 38\u201360 mm Outriggers The AS46300 is a robust steel mounting plate designed to secure suitable round-tube outriggers and mast sections with outside diameters from \u00d8 38 to 60 mm. It can be used as a component in satellite, antenna and technical wall-mounting structures, particularly with […]<\/p>\n","protected":false},"featured_media":56568,"template":"","meta":{"ep_exclude_from_search":false},"product_cat":[235],"product_tag":[],"class_list":{"0":"post-2976","1":"product","2":"type-product","3":"status-publish","4":"has-post-thumbnail","6":"product_cat-antennenmast-zubehoer","7":"product_shipping_class-paket","9":"first","10":"onbackorder","11":"taxable","12":"shipping-taxable","13":"purchasable","14":"product-type-simple"},"_links":{"self":[{"href":"https:\/\/www.gallun-shop.com\/en\/wp-json\/wp\/v2\/product\/2976"}],"collection":[{"href":"https:\/\/www.gallun-shop.com\/en\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/www.gallun-shop.com\/en\/wp-json\/wp\/v2\/types\/product"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.gallun-shop.com\/en\/wp-json\/wp\/v2\/media\/56568"}],"wp:attachment":[{"href":"https:\/\/www.gallun-shop.com\/en\/wp-json\/wp\/v2\/media?parent=2976"}],"wp:term":[{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/www.gallun-shop.com\/en\/wp-json\/wp\/v2\/product_cat?post=2976"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/www.gallun-shop.com\/en\/wp-json\/wp\/v2\/product_tag?post=2976"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}