4-Hole Steel Mast Clamp for Tubes \u00d8 48\u201350 mm \u2013 Galvanically Zinc Plated<\/p>\n
The AS46050 is a robust four-hole mast clamp designed to secure antenna and round mast tubes with an outside diameter between \u00d8 48 and 50 mm to a suitable structural support.<\/p>\n
Typical applications include mounting an antenna mast to a roof rafter, timber beam or another suitable load-bearing structure.<\/p>\n
According to the available product data, the clamp is manufactured from 3 mm steel sheet and has a galvanically zinc-plated surface.<\/p>\n
Two screws are included according to the available product information. Their exact dimensions and suitability for a particular substrate are not confirmed and should therefore be checked before installation.<\/p>\n
For tubes \u00d8 48\u201350 mm<\/p>\n
The clamp is intended for mast tubes with outside diameters between:<\/p>\n
\u00d8 48 mm<\/p>\n
\u00d8 50 mm<\/p>\n
The actual tube diameter should be checked before installation.<\/p>\n
Four-hole mounting design<\/p>\n
The four-hole design allows the clamp to be fixed at several points to a suitable support structure.<\/p>\n
Possible mounting locations include suitable:<\/p>\n
roof rafters<\/p>\n
timber beams<\/p>\n
structural supports<\/p>\n
3 mm steel sheet<\/p>\n
The clamp is manufactured from:<\/p>\n
3 mm steel sheet<\/p>\n
according to the available product data.<\/p>\n
Galvanically zinc plated<\/p>\n
The steel surface is galvanically zinc plated to support corrosion protection in typical antenna mounting environments.<\/p>\n
No confirmed zinc coating thickness is stated.<\/p>\n
Roof rafter applications<\/p>\n
One typical use is securing a \u00d8 48\u201350 mm antenna mast to a structurally sound roof rafter.<\/p>\n
The roof structure must be capable of carrying the antenna and wind loads transferred through the mast.<\/p>\n
Not a complete mast system<\/p>\n
The AS46050 is a single mechanical mounting component.<\/p>\n
Depending on mast length and antenna load, additional clamps or support points may be required.<\/p>\n
Satellite antenna applications<\/p>\n
The clamp may form part of a suitable satellite mast installation.<\/p>\n
No confirmed maximum satellite dish size is specified.<\/p>\n
Suitability depends on the complete system, including:<\/p>\n
mast wall thickness<\/p>\n
unsupported mast length<\/p>\n
antenna weight<\/p>\n
wind area<\/p>\n
support spacing<\/p>\n
structural support<\/p>\n
Other antenna applications<\/p>\n
The clamp may also be used in suitable installations for:<\/p>\n
DVB-T\/T2 antennas<\/p>\n
DAB\/DAB+ antennas<\/p>\n
FM antennas<\/p>\n
suitable radio antennas<\/p>\n
Replacement and retrofit work<\/p>\n
The AS46050 can be used when replacing a damaged existing mast clamp or adding another suitable fixing point to an existing mast structure.<\/p>\n
Included screws<\/p>\n
According to the available product data, two screws are included.<\/p>\n
Their use must be checked against the actual mounting surface. Additional or different fixing hardware may be required depending on the installation.<\/p>\n
Technical specifications<\/p>\n
Article reference: AS46050
\nArticle number: 46050
\nEAN: 4050822460502
\nProduct type: 4-hole mast clamp \/ pipe clamp
\nSuitable tube diameter: \u00d8 48\u201350 mm
\nMaterial: Steel sheet
\nMaterial thickness: 3 mm
\nSurface: Galvanically zinc plated
\nMounting design: 4-hole
\nIncluded screws: 2 according to product data
\nMaximum load: Not specified
\nMaximum antenna size: Not specified<\/p>\n
Package contents<\/p>\n
1 \u00d7 AS46050 galvanically zinc-plated 4-hole mast clamp for \u00d8 48\u201350 mm tubes
\n2 \u00d7 screws according to available product data<\/p>\n
Mast tube, satellite dish, other antennas, anchors and additional installation accessories are not included unless separately specified.<\/p>\n
AMAZON.DE \u2013 PRODUKTBESCHREIBUNG<\/p>\n
Die AS46050 ist eine robuste 4-Loch-Mastschelle<\/p>","protected":false},"excerpt":{"rendered":"
4-Hole Steel Mast Clamp for Tubes \u00d8 48\u201350 mm \u2013 Galvanically Zinc Plated The AS46050 is a robust four-hole mast clamp designed to secure antenna and round mast tubes with an outside diameter between \u00d8 48 and 50 mm to a suitable structural support. Typical applications include mounting an antenna mast to a roof rafter, […]<\/p>\n","protected":false},"featured_media":84932,"template":"","meta":{"ep_exclude_from_search":false},"product_cat":[235],"product_tag":[],"class_list":{"0":"post-2351","1":"product","2":"type-product","3":"status-publish","4":"has-post-thumbnail","6":"product_cat-antennenmast-zubehoer","7":"product_shipping_class-postwarenpost-individuell","9":"first","10":"instock","11":"taxable","12":"shipping-taxable","13":"purchasable","14":"product-type-simple"},"_links":{"self":[{"href":"https:\/\/www.gallun-shop.com\/en\/wp-json\/wp\/v2\/product\/2351"}],"collection":[{"href":"https:\/\/www.gallun-shop.com\/en\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/www.gallun-shop.com\/en\/wp-json\/wp\/v2\/types\/product"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.gallun-shop.com\/en\/wp-json\/wp\/v2\/media\/84932"}],"wp:attachment":[{"href":"https:\/\/www.gallun-shop.com\/en\/wp-json\/wp\/v2\/media?parent=2351"}],"wp:term":[{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/www.gallun-shop.com\/en\/wp-json\/wp\/v2\/product_cat?post=2351"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/www.gallun-shop.com\/en\/wp-json\/wp\/v2\/product_tag?post=2351"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}