Triple LNB Multifeed Holder for 3 × Ø 40 mm LNBs – Plastic Extension Bracket
The AS61130 is a multifeed holder designed to position up to three LNBs with standard Ø 40 mm feed necks on a suitable satellite antenna system.
It is intended as an extension solution for compatible feed holder adapters and allows multiple satellite positions to be received using a single suitable reflector.
Three separate LNB positions
The bracket provides three individual LNB mounting positions.
It may be used with suitable:
Single LNBs
Twin LNBs
Quad LNBs
Quattro LNBs
compatible Unicable/SCR LNBs
All LNBs must have a Ø 40 mm feed neck and sufficient housing clearance.
Standard Ø 40 mm feed clamp
The holder is designed for the widely used 40 mm LNB feed diameter.
Before installation, both feed neck diameter and LNB housing dimensions should be checked.
Multi-satellite reception
With a compatible dish geometry, the three LNBs can be aligned to different orbital positions.
The actual satellite combination depends on:
dish diameter
reflector geometry
installation location
orbital spacing
LNB housing width
available adjustment range
Plastic construction
According to the available product data, the holder is manufactured from plastic.
This provides a lightweight and corrosion-resistant base material for LNB positioning.
Easy replacement of individual LNBs
Each LNB is retained in its own clamp.
According to the available product data, an individual LNB can be removed by opening the two screws on the corresponding clamp without dismantling the complete holder.
After replacement, reception quality should nevertheless be checked and fine adjustment may be required.
Mechanical positioning only
The AS61130 provides mechanical positioning of the LNBs only.
It does not provide electrical switching between satellites.
Depending on the installation, additional equipment may include:
DiSEqC switches
multiswitches
suitable receivers
coaxial cables
F connectors
Typical applications
The AS61130 is suitable for:
multi-satellite reception
extending an existing satellite system
three-position LNB installations
satellite systems with multiswitch distribution
private and smaller commercial antenna installations
Technical specifications
Article reference: AS61130
Article number: 61130
Product type: Triple LNB multifeed holder
Number of LNB positions: 3
Feed diameter: Ø 40 mm
Material: Plastic according to product data
Application: Multi-satellite reception
Mounting: Extension for compatible feed holder adapters
Individual LNB removal: Clamp can be opened using two screws
Electrical switching: Not included
Package contents
1 × AS61130 multifeed holder for 3 LNBs with Ø 40 mm feed necks
LNBs, satellite dish, feed arm adapter, DiSEqC switches, multiswitches, receivers and coaxial cables are not included unless separately specified.
