High-quality stripping tool for coaxial cable 1.0/4.6 and 0.8/3.7
Handy and comfortable stripping tool and wrench for F-connectors (HEX 11) in one tool. Supported cable types: RG59, RG6
Technical data:
– suitable for coaxial cables with inner conductor 1.0/4.6 or 0.8/3.7
– including integrated wrench for F-connectors
Very easy to use, even for laymen: press the button, insert the (neatly cut) cable as far as it will go, release the button and turn the tool around the cable 5-10 times, remove the cable and trim away the insulation remnants. You will be left with an exposed inner conductor of 6.5 mm in length, as well as a braided shield that has been stripped of its sheath, also 6.5 mm in length.
2 blades for simultaneously stripping the outer conductor and the inner conductor in a single operation. Both blades are permanently installed (not adjustable, but work without problems for most cable types).
The stop is removable; thus, a longer inner conductor can also be created.
The wrench is reinforced on the inside with metal to prevent it from wearing out too quickly.
