The QUICK 6211 fume extraction system is a high-performance extraction solution for work areas where soldering fumes and other process-related vapors must be reliably captured and filtered. The device is particularly suitable for classic soldering applications, laser soldering processes, laser marking, and similar areas of application where clean air in the workplace and effective smoke filtration are required. According to the manufacturer, the system works with a four-stage filter system consisting of a pre-filter, medium filter, main filter, and activated carbon filter.
Thanks to its powerful suction and high static pressure, the generated fumes can be effectively captured via a connected extraction hose and fed into the filtration system. The filtration efficiency is designed for fine particles and is specified in the manual as 99.97 percent at 0.3 µm. This makes the QUICK 6211 an interesting solution for professional soldering workstations in electronics manufacturing, workshops, laboratories, service, and production.
Another advantage is the integrated LCD display. The display allows operating states and settings to be conveniently monitored. In addition, the device has an intelligent filter change reminder that indicates when the filter elements need to be replaced. This ensures that the extraction performance can be maintained at a consistently high level and maintenance costs remain predictable.
The QUICK 6211 is designed for a single workstation and operates at 220 V AC with a power consumption of 400 W. The system flow rate with filters installed is 200 m³/h. The static pressure is 6000 Pa, which means that even when the filter is in operation, a powerful extraction effect is achieved. The noise level is specified as a maximum of 70 dB. With dimensions of 319 x 227 x 422 mm and a weight of approx. 10.6 kg, the device remains compact enough to be easily integrated into existing workplaces.
The existing communication interface is also interesting for professional use. The manual describes a DB9 interface that provides various signals and communication functions. This allows the device to be integrated into more technically demanding work environments, depending on the application.
In practical operation, the extraction system is set up, connected to the extraction hose, and then plugged into the power supply. The airflow can be adjusted in several stages, allowing the extraction performance to be adapted to the specific application. The device also supports functions such as language selection, an alarm for a blocked rotor, and settings for the communication address and baud rate.
Area of application
The QUICK 6211 is suitable for use wherever soldering fumes or similar vapors need to be extracted and filtered directly at the source. Typical areas of application include electronics workstations, repair and rework stations, manual soldering stations, laser soldering applications, marking and laser workstations, as well as technical workshops and manufacturing environments. The unit is particularly useful for users who value a clean work area, reduced smoke exposure, and controlled airflow.
Important information
According to the instructions, the device must not be used to extract flammable or explosive gases. It is also not intended for use in areas with fire, very high heat, or heavy sparks. During operation, the device must be kept upright and the air inlet and outlet must not be blocked.
Technical
Model: QUICK 6211
Designed for: 1 workstation
Operating voltage: AC 220 V
Power consumption: 400 W
System flow rate with filters: 200 m³/h
Filter efficiency: 99.97% at 0.3 µm
Static pressure: 6000 Pa
Noise level: ≤ 70 dB
Dimensions: 319 x 227 x 422 mm
Weight: approx. 10.6 kg
Filter system: Pre-filter, intermediate filter, main filter, activated carbon filter
Display: LCD display
Special features: Filter change reminder, multi-stage airflow control, communication interface
