Adjustable S-Shaped Satellite Wall Mount – up to 450 mm Offset, Ø 48 × 2 mm, Hot-Dip Galvanised Steel
The AS24245 is an adjustable steel satellite wall mount designed for permanent installation of suitable satellite dishes.
Its angled S-shaped tube allows the distance between the antenna mounting position and the wall to be adapted to the installation requirements.
According to the available product data, the wall offset can be adjusted up to a maximum of 450 mm.
The mounting tube measures Ø 48 mm with a wall thickness of 2.0 mm and a height of 280 mm.
The construction is manufactured from steel with hot-dip galvanising according to EN ISO 1461 and is specified for satellite dishes up to Ø 100 cm.
Adjustable wall offset up to 450 mm
The wall distance can be adjusted up to:
450 mm
This is useful where additional clearance is required because of:
roof overhangs
projecting wall sections
recessed façades
building edges
additional space required behind the dish
Use only the required offset
A larger wall offset provides more clearance but also increases leverage on the wall fixing.
For mechanical reasons, the shortest setting that provides sufficient clearance is generally preferable.
Angled S-shaped mounting tube
The mounting tube has an angled S-shaped design.
Tube specifications:
Outside diameter: Ø 48 mm
Wall thickness: 2.0 mm
Height: 280 mm
The satellite dish clamp must be compatible with a Ø 48 mm tube.
Suitable for dishes up to Ø 100 cm
According to the available product data, the AS24245 is suitable for satellite dishes up to 100 cm in diameter.
Actual mechanical suitability also depends on:
dish weight
wind area
selected wall offset
installation height
wall construction
fixing system
Hot-dip galvanised steel
The wall mount is manufactured from steel with hot-dip galvanising according to EN ISO 1461.
This supports corrosion protection for permanent outdoor use.
Base plate dimensions
The base plate measures:
168 × 132 mm
Mounting hole spacing
According to the product data, the mounting hole spacing is:
horizontal: 145 mm
vertical: 90 mm
These dimensions can be useful when planning a new installation or checking an existing mounting pattern.
Do not automatically reuse old anchors
Even if an existing hole pattern matches, old wall plugs or anchors should be checked for condition and suitability before reuse.
Leverage increases with extension
At the maximum 450 mm setting, wind and antenna weight generate a greater bending moment at the wall fixing than at a shorter setting.
The complete installation must therefore be suitable for the actual load.
Wall fixing must match the substrate
Different wall materials may require different fixing systems, including:
concrete
solid masonry
hollow masonry
aerated concrete
natural stone
insulated façades
Typical applications
The AS24245 can be used for:
satellite wall installations
mounting below a roof overhang
installations next to projecting walls
gable mounting
replacing a fixed-offset wall bracket
retrofit satellite installations
Technical specifications
Article reference: AS24245
Article number: 24245
EAN: 4050822242450
Product type: Adjustable satellite wall mount
Material: Steel
Surface: Hot-dip galvanised according to EN ISO 1461
Wall offset: Adjustable up to max. 450 mm
Height: 280 mm
Mounting tube: Angled S-shape
Tube diameter: Ø 48 mm
Tube wall thickness: 2.0 mm
Suitable satellite dish size: Up to Ø 100 cm according to product data
Base plate: 168 × 132 mm
Horizontal hole spacing: 145 mm
Vertical hole spacing: 90 mm
Package contents
1 × AS24245 adjustable satellite wall mount
Satellite dish, LNB, wall fixing hardware, coaxial cable and additional installation accessories are not included unless separately specified.
